Polyaspartic Additives
Terachem® 53-2371
Terachem® 53-2371 offers the formulator the opportunity to improve resistance to mar and scratch at very high loadings with minimal effect on gloss, clarity, shade, and viscosity in systems tested. Terachem® 53-2371 in properly formulated polyaspartic coatings systems can be useful for a variety of applications, including uses on wood, concrete, composites, and metal.
Terachem® 53-2371 can also reduce the quantity of both resin and hardener in the polyaspartic formulation, resulting in a corresponding reduction in raw material cost of the more expensive ingredients at about an equivalent level of performance.
Tallicin® 4040
Tallicin® 4040 is a 100% active bubble-release and flow and leveling agent for 2K polyaspartics, polyurethanes, and epoxies. Tallicin® 4040 is designed for use in primers and topcoats, both clear and pigmented, including high-solids and solvent-free formulations. Tallicin® 4040 can also be used with polyester, acrylic, alkyd, and chlorinated rubber systems.
Tallicin® 4050
Tallicin® 4050 is a bubble-release and flow and leveling agent for 2K polyaspartics, polyurethanes, and epoxies. Tallicin® 4050 is designed for use in primers and topcoats, both clear and pigmented, including high- solids and solvent-free formulations. Tallicin® 4050 can also be used with polyester, acrylic, alkyd, and chlorinated rubber systems.
Tallicin® 4055
Tallicin® 4055 is recommended solvent-free polyaspartics, polyurethanes, and epoxies used for concrete floor coatings, particularly those with dry film thickness greater than 10 mils. Tallicin® 4055 contributes to bubble- release, flow, and leveling when the coating is applied onto concrete floors with squeegees and then back- rolled. Tallicin® 4055 helps to minimize both macro bubbles and micro bubbles. In addition, Tallicin® 4055 promotes the elimination of pinholes and craters that cause coating failures and customer dissatisfaction.
